Action
Step 4
Try a different toner cartridge.
Did this fix the problem?
Step 5
Check the connections between the cartridge gearbox and the controller
board.
Is the cable properly connected to the cartridge gearbox and to the
controller board?
Step 6
Reconnect the cable to the cartridge gearbox and to the controller board.
Did this fix the problem?
Step 7
Replace the cartridge gearbox. See
page
183.
Did this fix the problem?
USB print service check
Action
Step 1
Enter Diagnostic mode and perform a print test to make sure the printer
prints correctly. Verify that the indicator light is on, and then print the
menu settings page. Navigate to:
Reports > Menu Settings Page
Are the internal pages printing?
Step 2
Verify if the user's applications are set up correctly.
Are they set up correctly?
Step 3
Try a different application to run a print job.
Did the output print?
Step 4
Check the printer driver.
Is the correct driver being used and properly set up?
"Cartridge gearbox removal" on
Diagnostic information
111
Yes
No
The problem is solved. Go to step 5.
Go to step 7.
Go to step 6.
The problem is solved. Go to step 7.
The problem is solved. Contact the next level
of support.
Yes
No
Go to step 2.
Go to step 7.
Go to step 4.
Go to step 3.
This is not a printer
Go to step 4.
issue.
Go to step 6.
Go to step 5.
4514