Cooling fan duct removal
Note: This is not a FRU.
1
Remove the right cover. See
2
Remove the screw (A), and then remove the cooling fan duct.
Cooling fan removal
1
Remove the right cover. See
2
Remove the cooling fan duct. See
3
Disconnect the cable JFAN1 or JFAN2 from the controller board.
4
Remove the two screws (A) securing the fan mount to the printer.
"Right cover removal" on page
"Right cover removal" on page
"Cooling fan duct removal" on page
Repair information
186
185.
A
185.
186.
A
4514