Load Manual Feeder With [Paper Size] [Orientation]; Load Manual Feeder With [Paper Type] [Paper Size] [Orientation]; Memory Full [38]; Network [X] Software Error [54] - Lexmark MS315 Service Manual

Load Manual Feeder with [paper size] [orientation]

Try one or more of the following:
•
Load the feeder with the correct size of paper.
•
From the printer control panel, press
Note: If no paper is loaded in the feeder, then the printer manually overrides the request, and then prints from
an automatically selected tray.
•
Cancel the current job.

Load Manual Feeder with [paper type] [paper size] [orientation]

Try one or more of the following:
•
Load the feeder with the correct size and type of paper.
•
From the printer control panel, press
Note: If no paper is loaded in the feeder, then the printer manually overrides the request, and then prints from
an automatically selected tray.
•
Cancel the current job.

Memory full [38]

Try one or more of the following:
•
From the printer control panel, press
•
Decrease the resolution setting.
• Install additional printer memory.

Network [x] software error [54]

Try one or more of the following:
• From the control panel, press
•
Turn off the printer, wait for about 10 seconds, and then turn the printer back on.
•
Update the network firmware in the printer or print server. For more information, go to
http://support.lexmark.com.
Non‑Lexmark [supply type], see User's Guide [33.xy]
Note: The supply type can either be a toner cartridge or an imaging unit.
The printer has detected a non‑Lexmark supply or part installed in the printer.
Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-party supplies
or parts may affect the performance, reliability, or life of the printer and its imaging components.
to clear the message and continue printing.
to clear the message and continue printing.
to clear the message.
to continue printing.
Diagnostic information
72
4514