A.1 Booting Lfu - Compaq AlphaServer GS60E Service Manual

A.1 Booting LFU

Abstract LFU is supplied on the Alpha CD-ROM (Part Number AG–
RCFB*–BE, where * is the letter that denotes the disk revision). Make
sure this CD-ROM is mounted in the in-cabinet CD drive. Boot LFU
from the CD-ROM.
Example A–1 Booting LFU from CD-ROM
P00>>> sho dev
polling for units on isp0, slot 0, bus0, hose0...
dka400.4.0.0.0
polling for units on isp1, slot 1, bus0, hose0...
polling for units on isp2, slot 4, bus0, hose0...
polling for units on isp3, slot 5, bus0, hose0...
dkd400.4.0.5.0
dkd500.5.0.5.0
P00>>> boot dkd400
Building FRU table............
(boot dkd400.4.0.5.0 -flags 0,a0)
SRM boot identifier: scsi 4 0 5 0 400 ef00 81011
boot adapter: isp3 rev 2 in bus slot 5 off of kftia0 in TLSB
slot 8
block 0 of dkd400.4.0.5.0 is a valid boot block
reading 1150 blocks from dkd400.4.0.5.0
bootstrap code read in
Building FRU table.......
base = 200000, image_start = 0, image_bytes = 8fc00
initializing HWRPB at 2000
initializing page table at 1f2000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
The default bootfile for this platform is
[gs140]gs140_v55_10.exe
Hit <RETURN> at the prompt to use the default bootfile.
˜
Bootfile:
Starting Firmware Update Utility
Unpacking firmware files
.
Service Manual
A-2
DKA400
DKD400
DKD500
—
–
RZ26L 440C
RRD47 0000
RZ26L 440C