Testing The Entire System - Compaq AlphaServer GS60E Service Manual

3.4

Testing the Entire System

The test command with no modifiers runs all exercisers for subsystems
and devices on the system.
Example 3–4 Sample Test Command for the Entire System
P00>>>test
Console is in diagnostic mode
Complete Test Suite for runtime of 1200 seconds
Type ^C to stop testing
Configuring system...
:
:
Memory Tests not run.
Starting network exerciser on ewa0.0.0.12.0 (id #28f) in internal loopback mode
Starting network exerciser on ewb0.0.0.11.0 (id #2a1) in internal loopback mode
Starting network exerciser on ewc0.0.0.12.4 (id #2b3) in internal loopback mode
Starting network exerciser on ewd0.0.0.11.4 (id #2c5) in internal loopback mode
Starting device exerciser on dka0.0.0.4.0 (id #36f) in READ-ONLY mode
Stopping device exerciser on dka0.0.0.4.0 (id #36f)
Starting device exerciser on dka100.1.0.4.0 (id #5df) in READ-ONLY mode
Stopping device exerciser on dka100.1.0.4.0 (id #5df)
Starting device exerciser on dka200.2.0.4.0 (id #858) in READ-ONLY mode
Stopping device exerciser on dka200.2.0.4.0 (id #858)
Starting device exerciser on dka300.3.0.4.0 (id #acc) in READ-ONLY mode
Stopping device exerciser on dka300.3.0.4.0 (id #acc)
Starting device exerciser on dka400.4.0.4.0 (id #d37) in READ-ONLY mode
Stopping device exerciser on dka400.4.0.4.0 (id #d37)
Stopping all testing...
Stopping network exerciser on ewd0.0.0.11.4 (id #2c5)
Stopping network exerciser on ewc0.0.0.12.4 (id #2b3)
Stopping network exerciser on ewb0.0.0.11.0 (id #2a1)
Stopping network exerciser on ewa0.0.0.12.0 (id #28f)
---------Testing done ------------
3-8 Service Manual
–
—
Must run separately using TEST MS7CC*
please wait
˜
™
š