Compaq AlphaServer GS60E Service Manual page 133

Removal
1. Shut down the operating system and turn the keyswitch to Off.
2. Shut the main circuit breaker off by pushing down the handle.
3. Ground yourself to the cabinet with an antistatic wrist strap.
4. Open the front cabinet door.
5. Remove the signal cable by loosening the two thumbscrews.
6. From the inside of the door, push on the left hand side boss until it snaps
out of the opening.
7. Move to the outside of the door. While supporting the OCP on the front side
of the door, carefully push on the right hand boss until it snaps free. Make
certain the OCP does not fall.
Replacement
•
Reverse the steps in the Removal procedure.
Verification
Power up the system and turn the keyswitch to On. Check that the Power and
On LEDs light.
Removal and Replacement Procedures 5-25