5.1.4
Processor, Memory, or Terminator Module Removal and
Replacement
Wear an antistatic wrist strap.
Release the handles and slide the
module out of the card cage. To replace, line up the module and cover
the guide and rail in the card cage, be sure the projections on the top
and bottom of the end plate align with the slots in the card cage, and
slide the module into the cage. Push the handles in to connect at the
centerplane, and let them spring into the stops.
Figure 5–1 Processor, Memory, or Terminator Module
5
4
SM51-99
5-12
Service Manual