Compaq AlphaServer GS60E Service Manual page 113

1. Remove the failing module (see Section 5.1.4). In this example, the primary
processor is the failing module and it is in slot 0.
2. Power up the system and make note of the version of console firmware in
the remaining modules. See
3. Power down the system and remove all processor modules. See Section
5.1.4.
4. Insert the replacement modules. See Section 5.1.4.
5. Power up the system and determine the version of console firmware in the
replacement module. If it is different from the other modules, boot LFU and
update the firmware using the update command. See
—
in Example 5-2.
Continued on next page
Removal and Replacement Procedures
š
.
5-5