This command requests a firmware update for a specific module. If
you want to update more than one device, you may use a wildcard but
not a list. For example, update k* updates all devices with names
beginning with k, and update * updates all devices.
LFU requires you to confirm the update. For processors, the first
update to confirm is the AlphaBIOS firmware; the second is the SRM
console firmware. In either case, the default is no.
Status message reports update and verification progress.
This is a second example.
The update failed. This could indicate a bad device.
CAUTION: Never abort an update operation. Aborting corrupts the
firmware on the module.
Continued on next page
Updating Firmware A-7
Need help?
Do you have a question about the AlphaServer GS60E and is the answer not in the manual?
Questions and answers