Running Diagnostics: The Test Command - Compaq AlphaServer GS60E Service Manual

3.3

Running Diagnostics: the Test Command

The test command allows you to run diagnostics on the entire system,
an I/O subsystem, a single module, a group of devices, or a single
device.
Example 3–3 Sample Test Commands
P00>>> test
P00>>> t pci0 –t 60
P00>>> test ms*
P00>>> t –q
3-6 Service Manual
# Tests the entire system.
# Default run time is 10 minutes.
# Tests all devices associated
# with the PCI0 subsystem.
# run time is 60 seconds.
# Tests all ms7cc memory modules.
# Status messages will not be
# displayed during test time.
Test