Compaq AlphaServer GS60E Service Manual page 57

Example 3–5 Sample Test Command, Memory Test (Continued)
Shutting down drivers...
Shutting down units on tulip2, slot 12, bus 0, hose 4...
Shutting down units on floppy1, slot 0, bus 1, hose 4...
Shutting down units on isp4, slot 6, bus 0, hose 4...
Shutting down units on isp5, slot 7, bus 0, hose 4...
Shutting down units on isp6, slot 8, bus 0, hose 4...
Shutting down units on isp7, slot 9, bus 0, hose 4...
Shutting down units on isp8, slot 10, bus 0, hose 4...
Shutting down units on tulip3, slot 11, bus 0, hose 4...
Shutting down units on tulip0, slot 12, bus 0, hose 0...
Shutting down units on floppy0, slot 0, bus 1, hose 0...
Shutting down units on isp0, slot 4, bus 0, hose 0...
:
:
P00>>>
In Example 3-5:
–
Enter test ms*.
—
All MS7CC memory modules are tested by the memory exerciser, a
series of tests executed from the processor module.
NOTE: To test a single memory module on your system, type:
test ms7ccn, where n is the module number.
Console Display and Diagnostics 3-11