Setting Procedure - Fuji Xerox DocumentCentre C400 series User Manual

2.2.2

Setting Procedure

The procedure is as follows:
Procedure
1
Configuring this machine:
Using either the touch panel display or CentreWare Internet Services, set the IP
address and set the port for LPD to Enabled (default: Disabled).
"1.3 Setting IP Address" (P. 13) for details on setting IP address.
q
"1.4 Setting Port" (P. 18) for details on setting the port.
q
More detailed settings can be done by using CentreWare Internet Services. For details, see
q
"Chapter 5 Configuring From Computer (CentreWare Internet Services)" (P. 105).
2
Configuring the computer:
Install the printer driver.
Before installing the printer driver, check the following items:
sFor Windows 95, Windows 98, Windows Me
Is TCP/IP protocol installed? If not installed, see the manual of the OS used to install it.
sFor Windows NT 4.0
Is TCP/IP protocol and Microsoft TCP/IP printing installed? If not installed, see the manual of
Windows NT 4.0 to install it.
sFor Windows 2000, Windows XP
Is Internet protocol (TCP/IP) installed? If not installed, see the manual of the OS used to install it.
For details on how to install the printer driver, see"3.4 Installing/Uninstalling the Printer Drivers"
(P. 50) for windows or see the PostScript software kit guide for Macintosh.
2.2 TCP/IP (LPD)
2
29