Fuji Xerox DocumentCentre C400 series User Manual page 35

9
Select Enable and then Save.
1. LPD - Port Status
Disable
Enable
The LPD screen is displayed.
To activate the LPD port, the IP address must be set. If the IP address has not been set, selecting the
Enable button will display the TCP/IP - Get IP Address screen. For details on setting the IP address,
see "1.3 Setting IP Address" (P. 13).
10
Check that Current Settings for Port Status is Enabled and then select
Close.
LPD
Items
1. Port Status
The Port Settings screen is displayed.
11
Repeat steps 6 to 9 to set SNMP to Enabled.
If there are other ports needed for printing, repeat steps 7 to 10 to set their status to Enabled.
12
Select Close repeatedly until the System Settings screen is displayed.
13
Select Close.
The machine will reboot and the display will return to the previous screen prior to this procedure.
Cancel
Current Settings
Enabled
1.4 Setting Port
Save
Close
Change
Settings
1
21