Setting Procedure; Configuring This Machine - Fuji Xerox DocumentCentre C400 series User Manual

2.1.2

Setting Procedure

The procedure is as follows:
Procedure
1

Configuring this machine:

Using either the touch panel display or CentreWare Internet Services, set the
port for SMB to Enabled (default: Disabled).
"1.4 Setting Port" (P. 18) for details on setting the port.
q
More detailed settings can be done by using CentreWare Internet Services. For details, see
q
"Chapter 5 Configuring From Computer (CentreWare Internet Services)" (P. 105).
By overwriting the config.txt files of this machine, the setting/changing of SMB can be done on the
q
Windows computer.
2
Configuring the computer:
Install the printer driver.
When using NetBEUI as the transport protocol, check that the NetBEUI protocol has been installed
q
on the host device. If not installed, see the manual of the OS used to install it.
When using TCP/IP as the transport protocol, check that the TCP/IP protocol has been installed on
q
the host device. If not installed, see the manual of the OS used to install it. IP address is needed on
both the host device and this machine.
"3.4 Installing/Uninstalling the Printer Drivers" (P. 50) for details on how to install the printer
driver.
2.1 Windows Network (SMB)
2
27