Fuji Xerox DocumentCentre C400 series User Manual page 56

3
Insert paper with the side to be printed
facing down, and push it right to the
end while aligning it with the paper
guide in front of you.
As settings can be done when printing from the com-
q
puter, you do not need to specify the paper size/type
on the Tray 5 (Bypass) screen which is displayed on
the control panel (touch panel display) when paper is
loaded.
Do not load different paper types together. It may
q
cause paper jam.
Do not load paper exceeding the maximum fill line. It
q
may cause paper jam or machine breakdown.
When printing heavyweight, curl the tip of the paper
q
as shown on the right diagram if paper cannot be fed
into the machine. However, if paper is too curled or
creased, it may cause paper jams.
Different paper sizes cannot be loaded at the same time.
4
Adjust the paper size guide to fit the
paper loaded.
5
Select Print from the File menu.
6
Check Name and then click Properties.
Depending on the application program, the way to display the printer properties dialog box may dif-
fer. See the manual of the application program used.
7
Click the Paper/Output tab.
3.2 About Paper
3
43