Fuji Xerox DocumentCentre C400 series User Manual page 55

3.2 About Paper
Loading procedure
Display the Paper/Output tab to configure the settings.
Only for bond, plain paper, recycled and heavyweight, you can print on the
reverse side of this paper that has been printed before.
Use Wordpad of Windows 98 as an example. The procedure is same when using
other OS.
Procedure
1
Open tray 5 (Bypass Tray).
If necessary, pull out the extension tray. The extension
tray can be pulled out in two stages.
3
2
Check the position of the paper guide
located in front of tray 5 (Bypass Tray).
Set the paper guide to the Standard position for normal
use.
If the paper guide is at the 12" (305 mm) position, move
it back to the Standard position. Also, for paper sizes
with width exceeding that of A3 i.e. 297 mm (e.g. 12
18"), move the paper guide. For details on moving the
paper guide, see "
42
Moving paper guide" (P. 44).
×