Fuji Xerox DocumentCentre C400 series User Manual page 34

1.4 Setting Port
5
Select Port Settings.
Network Settings
1
The Port Settings screen is displayed.
6
Check Current Settings for LPD.
If it is Enabled, there is no need to do any setting.
If it is Disabled, carry out the setting. If it is Enabled, proceed to step 12.
Port Settings
Items
1. Parellel
2. LPD
3. NetWare
4. SMB
5. IPP
For the remaining steps, LPD is assumed to be Disabled in this example.
7
Select LPD and then Change Settings.
Port Settings
Items
1. Parellel
2. LPD
3. NetWare
4. SMB
5. IPP
The LPD screen is displayed.
8
Select Port Status and then Change Settings.
LPD
Items
1. Port Status
The LPD - Port Status screen is displayed.
20
Port Settings Protocol Settings
Current Settings
Enabled
Disabled
Disabled
Enabled
Disabled
Current Settings
Enabled
Disabled
Disabled
Enabled
Disabled
Current Settings
Disabled
Close
Close
1/2
Change
Settings
Close
1/2
Change
Settings
Close
Change
Settings