Fuji Xerox DocumentCentre C400 series User Manual page 165

4
Select the mailbox for saving the scanned data.
Selecting the button will display the previous screen and the
use the numeric keypad on the control panel to enter the mailbox number directly at Go to.
Mailbox
001 002
K Mailbox H Mailbox
005 006
(Not in Use)
(Not in Use)
009 010
(Not in Use) (Not in Use)
If there are documents in the mailbox, the number of documents saved in the mailbox will be dis-
played on the bottom right of the screen in No. of Docs: once the mailbox is selected.
Mailbox
001 002
K Mailbox H Mailbox
005 006
(Not in Use) (Not in Use)
009 010
(Not in Use) (Not in Use)
If the password has been set, the screen to enter the password will appear. Enter the password and
q
then select the Confirm button. If you have forgotten the mailbox password, reset it in the System
Administration Mode.
Selecting the mailbox and the Document List button will enable you to check documents saved in
q
the mailbox. After checking, select the Close button.
5
Select Close.
The display will return to the Basic Scanning screen.
6
If necessary, configure the scan settings.
"3.3 Configuring Scan Settings" (P. 160) for details on configuring the scan settings.
7
Press Start.
Scanning of the document will begin and the scanned data will be saved in the specified mailbox.
003 004
H Mailbox
(Not in Use)
007 008
(Not in Use)
(Not in Use)
011 012
(Not in Use) (Not in Use)
003 004
H Mailbox (Not in Use)
007 008
(Not in Use) (Not in Use)
011 012
(Not in Use) (Not in Use)
3.1 How to Scan
button the next screen. You can
Close
Go to
(001 - 200)
Document List
Close
Go to
(001 - 200)
Document List
No. of Docs: 10
3
155