Fuji Xerox DocumentCentre C400 series User Manual page 77

4.1
This section describes how to print special papers. The following special papers can be
printed:
Heavyweight 1 (106-169 g/m
q
Heavyweight 1 (106-169 g/m
q
Heavyweight 2 (170-220 g/m
q
Heavyweight 2 (170-220 g/m
q
q Transparency
q Lightweight (55-63 g/m
Labels
q
q Custom 1-5
Use tray 5 (Bypass Tray) when printing these special papers.
Display the Paper/Output tab to configure these paper supply settings.
This will describe Wordpad of Windows 98 as an example. The procedure is the same when
using other OS.
When outputting transparencies continuously, they may stick to each other. To prevent this, remove about 20
q
4
sheets from the output tray, and then fan well to lower the temperature.
Use only labels exclusively made for this machine. If not, it may cause paper jams or machine breakdown.
q
Depending on the application program, the way to display the printer properties dialog box might differ. See the
q
manual of the application program used.
When loading transparencies in tray 5 (Bypass Tray), you are recommended to load in the portrait orientation.
q
For details on using tray 5 (Bypass Tray), see "3.2.6 Loading Paper in Tray 5 (Bypass Tray)" (P. 40).
q
"2.1 Loading Paper" in "Part 1 Hardware" of the User Guide (Copier) for details on paper types suitable or
unsuitable for copying and loading in each tray.
Procedure
1
Load special paper in tray 5 (Bypass Tray).
2
Select Print from the File menu.
3
Check Name and then click Properties.
4
Click the Paper/Output tab.
64
Printing Special Papers
2
)
2
) – Side 2
2
)
2
) – Side 2
2
)