Fuji Xerox DocumentCentre C400 series User Manual page 147

1.5 Configuring for Using Job Template
6
Select
FTP Client on the screen.
If it is Enabled, there is no need to do any setting. Proceed to step 11.
Port Settings
Items
6. EtherTalk
7. Salutation
8. Port 9100
1
9. SNMP
10. FTP Client
For the remaining steps, FTP Client is assumed to be Disabled in this example.
7
Select FTP Client and then Change Settings.
Port Settings
Items
6. EtherTalk
7. Salutation
8. Port 9100
9. SNMP
10. FTP Client
The FTP Client screen is displayed.
8
Select Port Status and then Change Settings.
FTP Client
Items
1. Port Status
The FTP Client - Port Status screen is displayed.
136
to display the next screen, and check Current Settings for
Current Settings
Disabled
Disabled
Disabled
Disabled
Disabled
Current Settings
Disabled
Disabled
Disabled
Disabled
Disabled
Current Settings
Disabled
Close
2/3
Change
Settings
Close
2/3
Change
Settings
Close
Change
Settings