Fuji Xerox DocumentCentre C400 series User Manual page 30

1.3 Setting IP Address
6
Select TCP/IP - Get IP Address and then Change Settings.
The display of Current Settings of TCP/IP - IP Address, TCP/IP - Subnet Mask, TCP/IP - Gateway
Address might differ according to your network environment used.
Protocol Settings
Items
1. Token Ring - Transmit Rate
2. Token Ring -Max Packet Size
1
3. Token Ring - Source Routing
4. TCP/IP - Get IP Address
5. TCP/IP - IP Address
The TCP/IP - Get IP Address screen is displayed.
7
Select Manual and then Save.
When obtaining address from the BOOTP server, select the BOOTP Server button, followed by the
Save button and then proceed to step 12.
2. TCP/IP - Get IP Address
The Protocol Settings screen is displayed.
8
Select TCP/IP - IP Address and then Change Settings.
Protocol Settings
Items
1. Token Ring - Transmit Rate
2. Token Ring -Max Packet Size
3. Token Ring - Source Routing
4. TCP/IP - Get IP Address
5. TCP/IP - IP Address
The TCP/IP - IP Address screen is displayed.
16
Current Settings
Auto
1500 Octet
Off
DHCP
DHCP in Progress
DHCP
IP Address, Subnet Mask and Gateway Address will
be automatically extracted from the DHCP Server.
BOOTP
Extraction begins when the Exit button is selected.
RARP
Manual
Current Settings
Auto
1500 Octet
Off
Manual
(Not Set)
Close
1/2
Change
Settings
Cancel Save
Close
1/2
Change
Settings