Updating The Software Using The Pc - Muratec MFX-2050 Field Engineering Manual

3.31.3 Updating the software using the PC

Important: You cannot update the software in following situations:
The machine is in transmission
·
The machine is in scanning or in printing
·
Data are stored in memory
·
In that case, wait until the transmission, scanning or printing ends, or the stored data is transmitted, deleted
or whatever and update the software.
1. Press <Setting>, <*>, <9>, <8>, [Enter].
2. Press [Main Board].
3. Connect your PC and the machine with USB cable.
4. Click [Start] on the PC screen.
3-170