Network Settings - Minicom Smart CAT5 Switch 16 IP Operating Manual

To change access rights:
1. From the Drop down list select a user/group. The selection list shows only
users and groups, which you have the right to change.
2. Click the Update button. The access rights of the user appear. The meaning of
the Permissions is as follows:
Viewing a field. allow view means you can view it. deny access means you
cannot view it.
Changing a field setting. Allow change means you can change it. Deny change
means you cannot change it.
Using a function. allow access means you can use it. deny access means you
cannot use it.
3. Select the desired permission and click Apply.
22.

Network Settings

From the Smart 16 IP Menu choose Network Settings. The Network Settings
appear. See Figure 21.
In the Network Settings panel you can change the network parameters.
The initial IP configuration is usually done directly at the host system. However
you can also connect to the Smart 16 IP using its pre-configured IP settings.
Warning! Changing the network settings of Smart 16 IP may result in losing the
connection. If you remotely change the settings ensure that all values will give
you access to the Smart 16 IP.
SMART CAT5 SWITCH 16 IP
Figure 21 Network Settings
29
.