Network > Snmp Settings; Administration > User Settings - Minicom Smart IP Access User Manual

13. Network > SNMP settings
From the menu click SNMP settings. The following appears.
From this page you can activate or deactivate SNMP logging.
Enable traps - Check to enable SNMP traps of Smart IP Access events and
operation.
Community – type the SNMP community
SNMP Manager IP - Enter the SNMP Server IP address
To save changes, click
14. Administration > User Settings
From the menu click User Settings, the following appears.
On this page an Administrator creates and edits users.
There are 3 levels of user access.
·
Administrator
·
User
·
View only
SMART IP ACCESS
Figure 8 SNMP settings
.
Figure 9 User Settings
13