Minicom Smart CAT5 Switch 16 IP Operating Manual page 20

.
SMART CAT5 SWITCH 16 IP
USB Mouse Type – Not active in the system, leave at the default state.
Auto Mouse speed
When Mouse Acceleration on the Host computer is enabled, check Auto Mouse
speed. We highly recommend disabling the Mouse Acceleration.
Fixed Mouse speed
When Mouse Acceleration on the Host computer is disabled, select Fixed Mouse
Speed see Figure 13. Also in the Scaling drop-down menu select 1.00.
Repeat this procedure separately for each Host computer.
Figure 13 Mouse settings
G&D Equalizer – This supports the mouse synchronization for Guntermann &
Drunck KVM switches. These switches perform an internal rescaling of the
mouse movements, which cause the existing algorithm to break if Smart 16 IP is
connected behind such a switch. This option detects the rescaling and
compensates for it, so that the mouse synchronization works. Where there are no
G&D KVM switches in the system, do not select this option - it may disrupt the
normal mouse synchronization.
- Click to apply changes
- If the keyboard or mouse seems to react irrationally click to reset the
keyboard and mouse emulation. It is like disconnecting and reconnecting the
keyboard and mouse connectors.
Adjust keyboard and mouse settings for all Smart 16 IP ports.
19