Printing Date And Time On Incoming Mail; Time On Incoming Mail - Pitney Bowes DM200i series Operator's Manual

3 • Running Mail
Bypass Printing and Seal the Envelope Only
(if a moistener is available)
If using the moistener, you can set up your mailing system to seal
envelopes without printing a digital meter stamp on them.
1. Press Print Menu.
2. Select "Seal Only"
The "SEAL ONLY- NO PRINTING" screen appears.
3. Place flap along moistener and move towards the right.
4. Slide the envelope to the right until the system takes hold of it.
The system seals and ejects the piece.
5. Select "Exit" when finished to return you to the Home screen.
Printing the Date and Time on Incoming Mail
You can set up your mailing system to print the date and time on
incoming pieces of mail. This feature is only available on certain
models in the DM100 series.
1. Press Print Menu.
2. Select "Date & Time Only".
The "DATE AND TIME ONLY - NO POSTAGE PRINTING"
screen appears.
3. Place the envelope up against the
registration wall of the system and
slide it to the right until the system
grasps it. The system prints the time
and date and ejects the envelope/
tape sheet.
NOTE: Make sure you orient the mail
piece so the date and time prints on
a blank section of the mail piece.
4. Select "Exit" when finished to return you to the Home screen.
3-10
.
SDC570H