Checking The Canister; Adjusting The Exup Cables - Yamaha FZS1000N Service Manual

CHECKING THE CANISTER/

ADJUSTING THE EXUP CABLES

CHECKING THE CANISTER
(for California only)
1. Remove:
S seat
S fuel tank
2. Check:
S hose and canister
Cracks/damage ! Replace.
S vent hose
Obstruction ! Clean.
3. Install:
S fuel tank
S seat
EAS00101
ADJUSTING THE EXUP CABLES
1. Remove:
S seat
S fuel tank
2. Remove:
S EXUP valve pulley cover 1
3. Check:
S EXUP operation
a. Disconnect the EXUP servomotor connector
1 .
b. Connect the battery to the EXUP servomotor
connector and check if the servomotor oper-
ates properly.
Battery positive lead ! black/yellow 2
Battery negative lead ! black/red 3
CAUTION:
To avoid damaging the servomotor, do not
leave the battery connected to it for more
than a few seconds.
c. Check that the EXUP valve operates properly.
d. Connect the EXUP servomotor connector.
3-26
CHK
ADJ