SHIFT SHAFT
EAS00328
CHECKING THE SHIFT SHAFT
1. Check:
shift shaft 1
Bends/damage/wear ! Replace.
shift shaft spring 3
Damage/wear ! Replace.
EAS00330
CHECKING THE STOPPER LEVER
1. Check:
stopper lever 1
Bends/damage ! Replace.
Roller turns roughly ! Replace the stopper
lever.
EAS00331
INSTALLING THE SHIFT SHAFT
1. Install:
shift shaft spring stopper 1
stopper lever spring 2
stopper lever 3
NOTE:
Apply LOCTITE
shaft spring stopper.
Hook the ends of the stopper lever spring onto
the stopper lever and the crankcase boss.
Mesh the stopper lever with the shift drum seg-
ment assembly.
2. Install:
shift shaft 1
spacer
NOTE:
Lubricate the oil seal lips with lithium soap
base grease.
Install the end of the shift shaft spring onto the
shift shaft spring stopper 2 .
5-49
ENG
22 Nm (2.2 m kg, 16 ft lb)
to the threads of the shift