Yamaha FZS1000N Service Manual page 55

Fuel pump lead
1
Fuel pump
2
EXUP cable
3
Handlebar switch lead (right)
4
Throttle cable 1
5
Throttle cable 2
6
Water-carburetor hose
7
Fan motor lead
8
Coolant reservoir tank over flow
9
hose
Fuel tank drain hose
10
Fuel tank breather hose
11
White paint mark
12
Rear brake light switch lead
13
Neutral switch lead
14
Speedo sensor lead
15
Pickup coil lead
16
CABLE ROUTING
Handle crown
17
Handlebar switch lead
18
Brake hose guide
19
A Fasten the fuel pump lead, pickup coil lead, neutral switch lead, speed
sensor lead, rear brake light switch lead and fuel pump with a plastic
clamp.
B Fasten the fuel hose, pickup coil lead, neutral switch lead and speed
sensor lead with a plastic clamp under the fuel hose.
C Put the EXUP cable into the air box cover.
D Route the T.P.S. lead inward the EXUP cable.
E Fasten the water-carburetor hose with a plastic band.
F Route the coolant hose over the frame.
G Fasten the handlebar switch lead and frame with a plastic guide.
H Align the white tape mark of the handlebar switch lead (right) with the
tank rail welding bead and clamp down throttle cables 1 and 2.
2-36
SPEC