Changing The Engine Oil - Yamaha FZS1000N Service Manual

Hide thumbs Also See for FZS1000N:
Table of Contents

Advertisement

CHANGING THE ENGINE OIL

EAS00073
CHANGING THE ENGINE OIL
1. Start the engine, warm it up for several min-
utes, and then turn it off.
2. Place a container under the engine oil drain
bolt.
3. Remove:
engine oil filler cap 1
engine oil drain bolt 2
(along with the gasket)
4. Drain:
engine oil
(completely from the crankcase)
5. If the oil filter cartridge is also to be replaced,
perform the following procedure.
a. Remove the oil filter cartridge 1 with an oil
filter wrench 2 .
b. Apply a thin coat of engine oil onto the O-ring
1 of the new oil filter cartridge.
CAUTION:
Make sure that the O-ring 1 is positioned
correctly in the groove of the oil filter car-
tridge.
3-20
CHK
ADJ
Oil filter wrench
YU-38411

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fzs1000nc

Table of Contents