Yamaha FZS1000N Service Manual page 217

CAMSHAFT
d. Turn both camshafts opposite each other so
that the punch marks c in the camshaft are
aligned with the arrow marks d in the cam-
shaft caps as shown.
e. While holding the camshafts, temporarily
tighten the camshaft sprocket bolts.
5. Install:
R timing chain tensioner
a. While lightly pressing the timing chain ten-
sioner rod by hand, turn the tensioner rod ful-
ly clockwise with a thin screwdriver 1 .
b. With the timing chain tensioner rod turned all
the way into the timing chain tensioner hous-
ing (with the thin screwdriver still installed),
install the gasket and the timing chain ten-
sioner 2 onto the cylinder block.
WARNING
Always use a new gasket.
c. Tighten the timing chain tensioner bolts 3 to
the specified torque.
Timing chain tensioner bolt
10 Nm (1.0 mR kg, 7.2 ftR lb)
d. Remove the screwdriver, make sure that the
timing chain tensioner rod releases, and then
tighten the cap bolt to the specified torque.
Timing chain cap bolt
12 Nm (1.2 mR kg, 8.7 ftR lb)
6. Turn:
R crankshaft
(several turns clockwise)
5-14
ENG