Special Tools - Yamaha FZS1000N Service Manual

EAS00027

SPECIAL TOOLS

The following special tools are necessary for complete and accurate tune-up and assembly. Use only
the appropriate special tools as this will help prevent damage caused by the use of inappropriate tools
or improvised techniques. Special tools, part numbers or both may differ depending on the country.
When placing an order, refer to the list provided below to avoid any mistakes.
Tool No.
Alternator Rotor Puller
YM-01080-A
This tool is used to remove the generator
rotor.
Universal Magneto & Rotor Holder
YU-01235
This tool is used to hold the generator rotor
when removing or installing the generator
rotor bolt or pickup coil rotor bolt.
Piston Pin Puller
YU-01304
This tool is used to remove the piston pins.
Fuel Level Gauge
YU-01312-A
This tool is used to measure the fuel level in
the float chamber.
Radiator
Radiator Pressure Tester
Pressure Tester
Radiator Pressure Tester Adapter
YU-24460-01
Radiator
Pressure
These tools are used to check the cooling
Tester Adapter
system.
YU-33984
Spanner Wrench
YU-33975
This tool is used to loosen or tighten the
steering stem ring nuts.
Steering Nut Wrench
YU-1268
This tool is used to loosen the steering stem
ring nuts.
Damper Rod Holder
YM-01447
This tool is used to hold the damper rod
assembly when loosening or tightening the
damper rod assembly bolt.
SPECIAL TOOLS
Tool name/Function
1-5
GEN
INFO
Illustration