Yamaha FZS1000N Service Manual page 177

FRONT FORK
4. Install:
S oil seal 1
(with the driver 2 and 43 mm adapter 3 )
Driver
YM-33963
43 mm Adapters
YM-8020-A
CAUTION:
Make sure that the numbered side of the oil
seal faces up.
NOTE:
S Before installing the oil seal, apply lithium soap
base grease onto its lips.
S Apply fork oil onto the outer surface of the inner
tube.
S Before installing the oil seal, cover the top of
the front fork leg with a plastic bag to protect
the oil seal during installation.
5. Install:
S oil seal clip
NOTE:
Adjust the oil seal clip so that it fits into the outer
tube's groove.
6. Fill:
S front fork leg
(with the specified amount of the recom-
mended fork oil)
Quantity (each front fork leg)
0.44 L (435 cm
(15.3 Imp oz, 14.7 US oz)
Recommended oil
Yamaha suspension oil "01" or
equivalent
CAUTION:
S Be sure to use the recommended fork oil.
Other oils may have an adverse effect on
front fork performance.
S When disassembling and assembling the
front fork leg, do not allow any foreign ma-
terial to enter the front fork.
NOTE:
Be sure to bleed the front fork.
4-52
CHAS
3
)