Chassis; Adjusting The Front Brake - Yamaha FZS1000N Service Manual

ADJUSTING THE FRONT BRAKE

EAS00107

CHASSIS

ADJUSTING THE FRONT BRAKE
1. Adjust:
brake lever position
(distance a from the throttle grip to the brake
lever)
a. While pushing the brake lever forward, turn
the adjusting dial 1 until the brake lever is in
the desired position.
NOTE:
Be sure to align the setting on the adjusting dial
with the arrow mark 2 on the brake lever hold-
er.
Position #1
Position #5
After adjusting the brake lever position,
make sure that the pin on the brake lever
holder is firmly inserted in the hole in the
adjusting dial.
A soft or spongy feeling in the brake lever
can indicate the presence of air in the brake
system. Before the vehicle is operated, the
air must be removed by bleeding the brake
system . Air in the brake system will con-
siderably reduce braking performance and
could result in loss of control and possibly
an accident. Therefore, check and, if nec-
essary, bleed the brake system.
CAUTION:
After adjusting the brake lever position,
make sure that there is no brake drag.
3-33
Distance
est.
Distance
est.
WARNING
CHK
ADJ
a is the larg-
a
is the small-