Checking The Drive Chain - Yamaha FZS1000N Service Manual

SWINGARM AND DRIVE CHAIN
4. Check:
S dust covers 1
S spacer 2
S oil seals 3
Damage/wear ! Replace.
S bearings 4
Damage/pitting ! Replace.
5. Check:
S connecting arms 1
S relay arm 2
Damage/wear ! Replace.
S bearings 3
S oil seals 4
Damage/pitting ! Replace.
S spacers 5
Damage/scratches ! Replace.
EAS00709

CHECKING THE DRIVE CHAIN

1. Measure:
S ten-link section a of the drive chain
Out of specification ! Replace the drive
chain, the drive sprocket and the rear wheel
sprocket as a set.
NOTE:
S While measuring the ten-link section, push
down on the drive chain to increase its tension.
S Measure the length between drive chain roller
1 and
S Perform this measurement at two or three dif-
ferent places.
2. Check:
S drive chain
Stiffness ! Clean and lubricate or replace.
4-71
CHAS
Ten-link drive chain section limit
(maximum)
150.1 mm (5.91 in)
11 as shown.