Bearings And Oil Seals - Yamaha FZS1000N Service Manual

Hide thumbs Also See for FZS1000N:

Table of Contents

IMPORTANT INFORMATION

BEARINGS AND OIL SEALS

1. Install bearings and oil seals so that the

manufacturer's marks or numbers are vis-

ible. When installing oil seals, apply a light

coat of lithium soap base grease onto the oil

seal lips. Oil bearings liberally when instal-

ling, if appropriate.

Do not spin the bearing with compressed air

because this will damage the bearing sur-

1. Before reassembly, check all circlips careful-

ly and replace damaged or distorted circlips.

Always replace piston pin clips after one use.

When installing a circlip 1 , make sure that

the sharp-edged corner 2 is positioned op-

posite the thrust 3 that the circlip receives.

Table of Contents