Installing The Front Fork Legs - Yamaha FZS1000N Service Manual

FRONT FORK
EAS00662

INSTALLING THE FRONT FORK LEGS

The following procedure applies to both of the
front fork legs.
1. Install:
S front fork leg
Temporarily tighten the upper and lower
bracket pinch bolts.
NOTE:
Make sure that the inner fork tube is flush with
the top of the handlebar holder.
2. Tighten:
S lower bracket pinch bolt 1
S cap bolt 2
S upper bracket pinch bolt 3
WARNING
Make sure that the brake hoses are routed
properly.
3. Adjust:
S spring preload
S rebound damping
S compression damping
Refer to "ADJUSTING THE FRONT FORK"
in chapter 3.
4-55
CHAS
23 Nm (2.3 mSkg, 17 ftSlb)
25 Nm (2.5 mSkg, 18 ftSlb)
30 Nm (3.0 mSkg, 22 ftSlb)