Removing And Disassembling The Front Brake Master Cylinder; Removing And Disassembling The Rear Brake Master Cylinder - Yamaha FZS1000N Service Manual

FRONT AND REAR BRAKES
EAS00588
REMOVING AND DISASSEMBLING THE
FRONT BRAKE MASTER CYLINDER
NOTE:
Before disassembling the front brake master
cylinder, drain the brake fluid from the entire
brake system.
1. Disconnect:
brake switch coupler
(from the brake switch)
2. Remove:
union bolt 1
copper washers 2
brake hose 3
NOTE:
To collect any remaining brake fluid, place a
container under the master cylinder and the end
of the brake hose.
3. Remove:
master cylinder bracket
master cylinder
4. Remove:
master cylinder boot
circlip
5. Remove:
master cylinder kit
spring
EAS00589
REMOVING AND DISASSEMBLING THE
REAR BRAKE MASTER CYLINDER
1. Remove:
side cover (right)
2. Remove:
union bolt 1
copper washers 2
brake hose 3
NOTE:
To collect any remaining brake fluid, place a
container under the master cylinder and the end
of the brake hose.
4-28
CHAS