Yamaha FZS1000N Service Manual page 244

CLUTCH
2. Measure:
S friction plate thickness
Out of specification ! Replace the friction
plates as a set.
NOTE:
Measure the friction plate at four places.
Friction plate thickness
Friction plate a
3.42 X 3.58 mm
(0.135 X 0.141 in)
<Limit>: 3.32 mm (0.131 in)
Friction plate b
2.92 X 3.08 mm
(0.115 X 0.121 in)
<Limit>: 2.82 mm (0.111 in)
3. Measure:
S assembly width a
Out of specification ! Adjust.
Assembly width
43.1 X 43.9 mm (1.70 X 1.73 in)
a. Assembly width adjusted by clutch plate 1
and 2 .
b. Select the clutch plate from the following
table.
Clutch plate 1
Part No.
168-16325-00
31A-16325-00
168-16324-00
Clutch plate 2
Part No.
31A-16325-00
168-16324-00
NOTE:
When adjusting the clutch assembly width [by
replacing the clutch plate(s)], be sure to replace
the clutch plate 1 first. After replacing the
cltuch plate 1 , if specifications cannot be met,
replace the clutch plate 2 .
5-41
ENG
Thickness
1.6 mm
(0.06 in)
2.0 mm
STD
(0.08 in)
2.3 mm
(0.09 in)
Thickness
2.0 mm
STD
(0.08 in)
2.3 mm
(0.09 in)