Installing The Cylinder Head - Yamaha FZS1000N Service Manual

CYLINDER HEAD
EAS00233

INSTALLING THE CYLINDER HEAD

1. Install:
R gasket
1
New
R dowel pins 2
2. Install:
R cylinder head
NOTE:
Pass the timing chain through the timing chain
cavity.
3. Tighten:
R cylinder head nuts 1 X
1st
2nd
R cylinder head bolt
NOTE:
R First, tighten the nuts 1 X
ly 20 Nm (2.0 mR kg, 14 ftR lb) with a torque
wrench.
R Retighten the nuts to 50 Nm (5.0 mR kg, 36
ftR lb).
NOTE:
R Apply engine oil onto the threads of the cylin-
der head nuts.
R Tighten the cylinder head nuts in the proper
tightening sequence as shown and torque
them in two stages.
4. Install:
R exhaust camshaft
R intake camshaft
Refer to "INSTALLING THE CAMSHAFTS".
5-18
ENG
10
20 Nm (2.0 mR kg, 14 ftR lb)
50 Nm (5.0 mR kg, 36 ftR lb)
11 12
12 Nm (1.2 mR kg, 8.7 ftR lb)
to approximate-
10