Checking The Coolant Level - Yamaha FZS1000N Service Manual

ADJUSTING THE EXUP CABLES/

CHECKING THE COOLANT LEVEL

4. Check:
5. Adjust:
a. Loosen both locknuts 1 .
b. Insert a 4 mm long pin through the notch in
c. Turn both adjusting bolts 2 counterclock-
d. Turn both adjusting bolts 1/2 of a turn clock-
e. Tighten both locknuts and then remove the
6. Install:
7. Install:
EAS00102
CHECKING THE COOLANT LEVEL
1. Stand the motorcycle on a level surface.
NOTE:
Place the motorcycle on a suitable stand.
Make sure that the motorcycle is upright.
2. Check:
3-27
EXUP cable free play a
EXUP cable free play
1.5 mm (0.06 in) max.
EXUP cable free play
the EXUP valve pulley and into the hole in the
EXUP valve cover.
wise until there is no EXUP cable free play.
wise.
pin.
EXUP valve pulley cover
10 Nm (1.0 m kg, 7.2 ft lb)
fuel tank
seat
coolant level
The coolant level should be between the
maximum level mark a and minimum level
marks b .
Below the minimum level mark
recommended coolant to the proper level.
CHK
ADJ
Add the