Tightening Torques; General Tightening Torques - Yamaha FZS1000N Service Manual

EAS00030
GENERAL TIGHTENING TORQUE
SPECIFICATIONS
This chart specifies tightening torques for stan-
dard fasteners with a standard ISO thread pitch.
Tightening torque specifications for special
components or assemblies are provided for
each chapter of this manual. To avoid warpage,
tighten multi-fastener assemblies in a criss-
cross pattern and progressive stages until the
specified tightening torque is reached. Unless
otherwise specified, tightening torque specifi-
cations require clean, dry threads. Compo-
nents should be at room temperature.
A: Distance between flats
B: Outside thread diameter
A B
(Nut) (Bolt)
6 mm
10 mm
8 mm
12 mm
10 mm
14 mm
12 mm
17 mm
14 mm
19 mm
16 mm
22 mm

TIGHTENING TORQUES

General tightening
torques
Nm m kg ft lb
6 0.6 4.3
15 1.5 11
30 3.0 22
55 5.5 40
85 8.5 61
130 13.0 94
2-18
SPEC