Yamaha FZS1000N Service Manual page 216

CAMSHAFT
3. Install:
R camshaft cap bolts
NOTE:
Tighten the camshaft cap bolts in stages and in
a crisscross pattern, working from the inner
caps out.
CAUTION:
The camshaft cap bolts must be tightened
evenly or damage to the cylinder head, cam-
shaft caps, and camshafts will result.
4. Install:
R intake camshaft sprocket
R exhaust camshaft sprocket
a. Turn the crankshaft clockwise.
b. When piston #1 is at TDC on the compres-
sion stroke, align the "T" mark a on the pick-
up coil rotor with the crankcase mating sur-
face b .
c. Place the timing chain onto both camshaft
sprockets and then install the camshaft
sprockets onto the camshafts.
NOTE:
When installing the camshaft sprockets, start
with the exhaust camshaft and be sure to keep
the timing chain as tight as possible on the ex-
haust side.
CAUTION:
Do not turn the crankshaft when installing
the camshaft to avoid damage or improper
valve timing.
5-13
ENG
10 Nm (1.0 mR kg, 7.2 ftR lb)