Teletek electronics ECLIPSE 8 Installation Manual page 19


Expanders' Terminals and Specifications
+/- AUX – Power supply for detectors with consumption
up to 0.75А
+PGM – Power supply for auxiliary devices with
consumption up to 0.75А
PGM 1 – Programmable output, 100mA, ОС type (open
collector)
Z1-Z8 – Zone inputs. Every input is independent full
functional zone with freely programmable parameters.
Every additional input to control panel must be attached
to a zone number at address 2xx0 (xx is number from 09
to 32) with the respective number of the device.
COM – Common ground
RED, GRN, YEL, BLK - System bus interface for
connection to control panel
Tamper – Terminals for Tamper switch
F1 – Fuses for PGMs output, 100mA
Button – Button for enrollment of the module to the
system configuration.
Technical Specifications:
Power Supply
Consumption
Zone inputs
PGM output
Operation temperature
Storage temperature

LED Indication of ZONE 8 and PGM 8 Expander Modules
BUS LED Lights on permanently
Red
RESET Jumper is set
Yellow Short circuit of the system bus
Green Selected device of the system bus
Button
9 ÷ 18V DC
Min. 20mA/
Max. 100mA
8
1
-20°C ÷ 50°C
-40°C ÷ 60°C
+PGM – Power supply for auxiliary devices with
consumption up to 0.75А
PGM 1-8 – Programmable outputs, 100mA, ОС type (open
collector). Every output is independent full functional PGM
with freely programmable parameters. Every additional
output to control panel must be attached to a PGM
number at address 3xx0 (xx is number from 06 to 32) with
the respective number of the device.
GND – Common ground
RED, GRN, YEL, BLK - System bus interface for
connection to control panel
Tamper – Terminals for Tamper switch.
F1 – Fuse for PGM output, 100mA
Button – Button for enrollment of the module to the
system configuration.
Technical Specifications:
Power Supply
Consumption
PGM outputs
Operation
temperature
Storage temperature
Internal structure of PGM outputs:
Blinks in pulses
Low power supply
Wrong connection of the system bus
Normal operation mode
19
Eclipse 8/ 32 Series - Installation Manual
Button
9 ÷ 18V DC
Min. 20mA/
Max. 100mA
7, 100mA, OC type + 1,
1A, OC type
-20°C ÷ 50°C
-40°C ÷ 60°C