Tadiran Telecom FlexSet 280 User Manual page 202

To perform unscreened transfer of an established call:
[XFER]
1. Press * (see page
2. Dial the required number or press a DSS key.
3. Listen for the ringback or busy tone
[SPKR]
4. Press or hang up to transfer call.
When transfer is not completed:
When an unscreened call is either busy or unanswered, the call will
automatically return to you after a system-wide time-out period.
Should the station remain unanswered (NANS) you will receive the following
message:
Should the station still remain busy (SBSY) you will receive the following
message:
When either of these above messages are received (telephone rings):
1. First answer the return call then either
[CAMP ON]
2. Press the key (for an explanation of Camp On, see
or
Ask calling party if they want to transfer to another party or to hang up.
Note: When you press the Camp On key the call will automatically camp on
to the station from which the call was transferred. This procedure can
be carried out any number of times.
Transfer
ix).
Display Message
D I A L
I N T E R N A L xxxx x
N A N S xx xxx y yyyy
N O A N S W E R xxx xx
S B S Y xxxx x yyy yy
B U S Y xxxxx
x = Station unanswered or still busy
y = Original caller (first party)
page 42)
177
Key LED
FlexSet 120/280 User Guide