Tadiran Telecom FlexSet 280 User Manual page 205

The turret console is comprised of two fully configured FlexSets that can be
operated independently one of another. One of the phones is defined as a
primary and the other as a secondary (partner).
Both FlexSets'expansion modules are operated by the primary FlexSet.
Pressing a DSS button on any of the six expansion modules activates the
primary FlexSet.
All the expansion modules may operate a secondary FlexSet, provided the
secondary FlexSet is in dialing mode and the primary is not.
To make a call from the primary FlexSet:
Refer to "Making Calls: External and Internal" on page 102
Dial the number of your contact from the primary FlexSet, or press a DSS
button on the primary FlexSet or on any of the six expansion modules.
To make a call from the partner FlexSet:
From the partner FlexSet, dial the number of the person to call, or press a
DSS button on the partner FlexSet,
or
1. Ensure that the primary FlexSet is not in dialing mode
1.
Dialing mode means either of the following:
· The telephone is in off-hook state
· SPKR or XFER button is pressed
· Dialing process is in progress
If both FlexSets are in dialing mode, pressing a DSS button on any of the six expansion modules will initiate a call from the primary
FlexSet
Turret Console
.
1
.
180
Display Message
FlexSet 120/280 User Guide
Key LED