Tadiran Telecom FlexSet 280 User Manual page 203

To transfer a held call:
Typically, use transfer of a held call to connect an incoming call to the held
party, such as when you have to locate someone for a caller.
1. Dial a number or receive a call while the first call is in hold.
[XFER]
2. Press .
3. Press the winking button associated with the held call.
[SPKR]
4. Press or hang up to transfer a call.
To continue as Broker/Consultation/3-Way Conference Call:
After pressing the winking button associated with the held call, before
transferring the call:
[XFER]
1. Press as required (see

Note: The held port must be on a DSS, Loop, Line or Trunk key.
Transfer
page 34).
Display Message
178
Key LED
FlexSet 120/280 User Guide