Announcing: Voice (To Single Flexset) - Tadiran Telecom FlexSet 280 User Manual

Paging, Announcing: Voice (To Single FlexSet)
Announcing a voice page to a single FlexSet can be used, for example, as an
intercom in order to converse between two stations, or as a simple pager.
To voice page a single FlexSet that is either busy or does not answer:
[VOICE PAGE]
1. Press during the call.
or
[XFER]
Press and dial Voice Page feature code 6.
To voice page (from idle):
1. Lift handset.
[VOICE PAGE
2. Either press
3. Dial FlexSet number
or
Dial Voice Page FlexSet number (see Note 3).
4. Listen for the Voice Page tone.
5. Begin paging when tone stops.
[SPKR]
6. Press or hang up to release.
Paging, Announcing: Voice (To Single FlexSet)
] or dial feature code #191.
Xfer 6, #191 or #3
V O I C E P A G E xxxxx
A N S W E R xx xxx
124
Display Message
FlexSet 120/280 User Guide
Key LED