Tadiran Telecom FlexSet 280 User Manual page 65

Operating Call Forward - key programmed with destination:
You can program a feature key for "Call Forward" to a specific destination (see
"Programming: Programmable Keys" on page
automatically activates Call Forward to the defined destination; the LED is lit.
When the key is pressed a second time, Call Forward turns off and the LED
extinguishes. Use the Divert Call feature (see
incoming call instead of answering the call.
An example of Call Forward All to Susan is shown below. The procedure is
similar for other Call Forward types.
To activate Call Forward All with destination:
[(E)FORWARD ALL SUSAN]
1. Press programmed
2. Listen for the confirmation tone.
To cancel Call Forward with destination:
[(E)FORWARD ALL SUSAN]
1. Press the lit
2. Listen for the confirmation tone.

Note: The Call Forward with Destination can only be activated if you have a
programmed key. To program a destination key with Call Forward,
use the relevant access code (see
destination number.
Call Forward
135). Pressing the defined key
page 56), to transfer a single
.
.
page 37), followed by the
Display Message
E) = External calls
( E ) F W D A L L
( E ) F W D A L L
40
Key LED
S
usan
O N
O F F
FlexSet 120/280 User Guide