Call Forward All External - Tadiran Telecom FlexSet 280 User Manual

Internal/External Forwarding
In addition to the forwarding options detailed on (see
or external source when forwarding. For each forwarding feature (forward all, when busy, on no answer, etc.), you can
program your FlexSet to forward your calls as follows:
• Forward internal and external calls to the same destination
• Forward internal and external calls to different destinations
• Forward internal calls only, while external calls continue ringing at your station
• Forward external calls only, while internal calls continue ringing at your station
This is demonstrated in the following table using the Call Forward All as an example:
Call Forward All (#141)
Case
Set to:
1 Feature not set
2 Destination X
3 Feature not set
4 Destination X
5 Destination X
Possible destinations for X are: operator, station/group, external number via public and private speed call library, DVMS
pre-recorded message, UNA/central bell, group call, or network number.
Possible destinations for Y are the same as for X, plus your own station number, thus facilitating forwarding of internal
calls to another destination, whilst retaining external calls at your own station, as shown in Case 5 above.
Call Forward
page 37), you can distinguish between calls arriving from an internal
Forward Option

Call Forward All External (#17702)

Set To:
and Feature not set
and Feature not set
and Destination Y
and Destination Y
Destination Y (Programmed as your
and
own station)
38
Display Message
Resultant Call Destination
Internal Calls
Go To:
Your own Station
Destination X
Your own Station
Destination X
Destination X
FlexSet 120/280 User Guide
Key LED
External Calls
Go To:
Your own Station
Destination X
Destination Y
Destination Y
Your own Station